Hidden implants
Parts that are not in the design: an extra chip, or any component that should not be on the board at all.
Now available · Hardware inspection
BoardSight
AI inspection that finds spy chips, counterfeit parts and altered firmware on circuit boards, before they go into service.
- Per board
- Under 60 s
- Planted faults found
- 97%
- Runs
- On site
In internal testing
Design files stay with you
What it checks
Three ways a board can lie to you.
Counterfeit parts
Components that are fake, or have been swapped for something other than what the design calls for.
Altered firmware
Firmware that has been changed. BoardSight checks what is on the device against a known good version.
How it works
Design files in. Answer in under a minute.
-
Step 01
Load the design
BoardSight starts from the original design files for the board.
-
Step 02
Scan the board
The board is scanned and compared against that design.
-
Step 03
Flag the parts
Anything fake, swapped or not meant to be there is flagged.
-
Step 04
Check the firmware
The firmware is checked against a known good version.
On the bench, not in a lab
Check every unit before it ships.
Finding one swapped chip used to mean sending a board to a lab for weeks. BoardSight takes under 60 seconds a board, so a supplier can check every unit on the bench instead of a sample.
- Runs on siteYour design files stay with you. Nothing is sent out to check a board.
- Under 60 seconds a boardFast enough to check every unit, not just a sample.
- 97% of planted faults foundDetection rate for faults planted on boards in our internal testing.
- Parts and firmwareOne check covers what is on the board and what it is running.
Availability
For government, defence and critical infrastructure.
After successful trials with two Australian defence contractors, BoardSight is now available to government, defence and critical infrastructure customers.
Book a trial
Bring us a board you need to trust.
Tell us what you build and what goes into it, and we will get back to you about a trial.